![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 8, '04 From KY Currently Offline Reputation: 0 (0%) ![]() |
I think these are fuel lines, anyone with a 3s tell me what goes into this?
Its bolted to the engine hook on the drivers side one end looks like it goes into the throttle body the other end I have no idea what goes to it. Also what plugs into this plug on the resistor pack? I also have a line that comes off right next to the main fuel line I'm not sure what that goes to either. I'm so close to getting my car going just need to find out where these lines go to! This post has been edited by Rjb23: Oct 6, 2005 - 4:44 PM |
![]() |
![]() |
|
![]() Enthusiast Joined Jun 17, '05 From Melbourne, Australia Currently Offline Reputation: 0 (0%) ![]() |
I could only view the top pic. Its the vacuum line tube bend for the idle control speed motor thats on the under side of the throttle body. One side goes to the isc and the other side goes to the turbo inlet pipe. Just buy some 10mm or so vac line and hook it up.
If you could check the link to the pics or if it starts working for me i'll let you know what the rest are. But i'm figuring that the bottom pic must be of a similar pipe which would be the other bend for the isc vac line |
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 5:59 AM |