mr2 turbo transmission axles, make this clear for once... Options

[st_celica_killer]

alright ...i have done alot of search on the forums but they never really talk about ..what type of axles are being used with the mr2 turbo transmission ??.. plus the car has been sitting for 2 month now without any clue on what type of axles are being used !!!!!! here a little infor on the project car its a 94 celica st 5sp with a 3sgte 2ndgen from a mr2 turbo...and now all i need is just the axles.to get the car running.....

P.S dont get flame cauz no one really cover what type of axles are being used on the mr2 turbo transmission .maybe someone did cover about it but ..i never really got the clear informantion about it..so..what type of axles are really being used.

[Rjb23]

You can use the st205 rear mount, and driverside mount, or you can use the st185 driverside insulator with the mr2 tranny mount, and use the GT bracket and weld a peice of metal to the bottom of the rear insulator that moves it over like an inch and a half.

This is what I plan on doing I have the alltrac insulator with the mr2 tranny bracket, and going custom rear mount. It takes 8 weeks to get the st205 mounts and I can get a custom rear mount from autolab for less than a $100.

[BBoYRuGGeD]

You can use the st205 rear mount, and driverside mount, or you can use the st185 driverside insulator with the mr2 tranny mount, and use the GT bracket and weld a peice of metal to the bottom of the rear insulator that moves it over like an inch and a half.

This is what I plan on doing I have the alltrac insulator with the mr2 tranny bracket, and going custom rear mount. It takes 8 weeks to get the st205 mounts and I can get a custom rear mount from autolab for less than a $100.
[right][snapback]341600[/snapback][/right]

ah ok so st205 rear and drivers... so the passengers and front GT mounts work with these and need no modification correct?

bboy