mr2 turbo transmission axles, make this clear for once... Options

[st_celica_killer]

alright ...i have done alot of search on the forums but they never really talk about ..what type of axles are being used with the mr2 turbo transmission ??.. plus the car has been sitting for 2 month now without any clue on what type of axles are being used !!!!!! here a little infor on the project car its a 94 celica st 5sp with a 3sgte 2ndgen from a mr2 turbo...and now all i need is just the axles.to get the car running.....

P.S dont get flame cauz no one really cover what type of axles are being used on the mr2 turbo transmission .maybe someone did cover about it but ..i never really got the clear informantion about it..so..what type of axles are really being used.

[Rjb23]

This is what I have on at the moment, I'll post later on how well it is working.

I have a e153 non lsd tranny, with 91 carrier shaft also with no circlip, 91 driverside innershaft with st185 outers on both sides.

For mounts I have the gt front and passenger side, the st185 or mr2 driverside insulator, mr2 tranny bracket, the mr2 rear bracket, same as the gt, and custom rear insulator.

I also have the st shifter cables they seem to work just fine, no problems with my hand hitting the dash or anything but then again I have a short shifter, the st185 are to short.