![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 8, '04 From KY Currently Offline Reputation: 0 (0%) ![]() |
I think these are fuel lines, anyone with a 3s tell me what goes into this?
Its bolted to the engine hook on the drivers side one end looks like it goes into the throttle body the other end I have no idea what goes to it. Also what plugs into this plug on the resistor pack? I also have a line that comes off right next to the main fuel line I'm not sure what that goes to either. I'm so close to getting my car going just need to find out where these lines go to! This post has been edited by Rjb23: Oct 6, 2005 - 4:44 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) ![]() |
its hard to tell what plug that is or where it goes from that pic.... but just so you know, there are about 2 or 3 plugs from the 3s harness that we leave disonnected.
the vac line in that 2nd pic, that comes from the top of the throttle body.... connects to the charcole canister. the brass stub blow is is part up the AC idle up. you should be able to just cap that. it normally goes to this round spring loaded screw type thing and then to the idle up valve. i still have mine in there (not the idel up valve tho) but you should be fine just caping that off and not using it. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 10:07 AM |