Feeler FS: 20V 4A-GE Conversion Stuff, Harness, AFM, ECU, Ignitor, etc. Options

[Coomer]

I'm preparing to run a Megasquirt setup on my car, and I'm wondering if anyone would be interested in a lot of the stuff for a conversion from your 7A-FE to a silvertop 4A-GE.

Stuff I'd have left over for sale would include:

Modified AE101 4A-GE into AT200 chassis harness - This harness would make it so you wouldn't have to do the wiring yourself.

AE101 4A-GE Manual-Tranny ECU - The ECU to run the silvertop 4A-GE.

AE101 4A-GE AFM - The required AFM for the silvertop 4A-GE's stock ECU.

Ignitor - The correct ignitor for the ignition.

MSD Coil - The coil I'm using for my ignition setup. It works perfectly with the rest of the stuff.

With this stuff, you'd only need the 4A-GE engine itself(with manifolds of course.) Then the only work would be swapping it in, getting a bit of custom exhaust work done, and getting the power steering and a/c working if wanted. Everything would plug and play.

So if you would be interested, let me know. This stuff wouldn't be available for a couple months at least, but I'm trying to justify the cost of converting to Megasquirt.

[soulshadow]

Coomer why don't we trade??? I'll get you all the stuff Megasquirt V2.2 extra, 10ft Wiring harness, fuses and holders, EDIS set: trigger disc, coils, spark plugs, EDIS it self, Vr-sensor, 1ft USB-to-SERIAL connector, all softwares and ect.

I got the MS pretty much brand new and tested, but because of fiddling around with the car I didn't have time to install MS. I still have to fix my rear motor mount, and the tranny seal that is now leaking oil. I JUST WANT MY CAR RUNNING WITHOUT DYING!!!