![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 8, '04 From KY Currently Offline Reputation: 0 (0%) ![]() |
Is it possible to remove the steering wheel and align it so its straight. Mine never got aligned right when it was hooked back up, don't ask, and its driving me nuts.
|
![]() |
![]() |
|
Enthusiast ![]() Joined Feb 18, '04 From Spokane Washington Currently Offline Reputation: 0 (0%) ![]() |
same here but that was my fault (i assembled it)
you will need a puller. This is a bar or four way peice of metel that will allow screws to thread into two holes on each side of the main nut. Then a big screw is turned through the center of the four way peice of metal to push the center hub away from the steering wheel. I had to use this on my rotors as well b/c they rusted solid to my hubs. here is a link http://www.sears.com/sr/javasr/product.do?...Specialty+Tools |
![]() ![]() |
Lo-Fi Version | Time is now: February 24th, 2025 - 12:03 AM |