FS: 1999 SS3 BEAMS 3SGE engine/trans/WIRING/ECU |
FS: 1999 SS3 BEAMS 3SGE engine/trans/WIRING/ECU |
Oct 15, 2005 - 6:47 AM |
|
Enthusiast Joined Oct 15, '05 From Montreal, Canada Currently Offline Reputation: 0 (0%) |
If anyone is interested, I have another one available, asking 2300$+ shipping since it has a slightly dented manifold:
ECU is included but not pictured email me at craynauld@videotron.ca if you are interested it has unknown mileage but its in the 40k miles ballpark, i didn't get the cluster The transmission is lsd but I do not have the axles(I can find the part number though). Comes with uncut harness up to ECU. I will include The 2000 TOYOTA EPC on DVD which included all the beams part numbers so that you can order them at either www.toyotaworld.com (USA) or www.fensport.com (UK). asking 2300$ usd + shipping(shipping is around 300$) I'm from the MR2 board(www.mr2oc.com) IF you want to check my feedback(100+ positive ones) : click here email me at craynauld@videotron.ca for more info Thanks Chris This post has been edited by rascaca: Dec 21, 2006 - 12:34 AM |
Oct 19, 2005 - 1:26 PM |
|
Enthusiast Joined Oct 15, '05 From Montreal, Canada Currently Offline Reputation: 0 (0%) |
What is needed and not included in the swap(you get whats is pictured):
the beams mass air flow part number is the same as the USDM V6 camry from 1997-2001(1mzfe engine) and can be found at www.car-parts.com for cheap(30$) The intake tubing needs to be found or made from TB to air filter. The right engine mount is only found in 3sge from 96+(3rd gen) and the part number is 12362-74421 (you can order it at the mentionned sites (www links) on first post) (the 2 other mounts missing can be found on the USspec 5sfe GT celica) you will need axles though if you want to use the lsd transmission(you can always use your non lsd one.) part number for the axles inner stub shaft are: 43030-32010 (right) 43040-32010 (left) which are found in the 86-89 gts 5speed celicas I'm not sure if the whole axle fits(don't think so) but I'm pretty sure you can use the 5sfe celica outer joints/shaft with the 86 gts inner shafts/stub. That leaves us with the exhaust that should be donne custom by a muffler shop. I do have the part number but i think it will be ridiculouly expensive to buy it new. |
Lo-Fi Version | Time is now: November 24th, 2024 - 2:39 PM |