6G Celicas Forums

Welcome Guest ( Log In | Register )

> 3SGTE Harness Routing and Lengthening
post Oct 20, 2005 - 8:25 PM
+Quote Post
WannabeGT4



Enthusiast
*****
Joined Oct 10, '03
From Wichita, KS
Currently Offline

Reputation: 5 (100%)




When you all had your harnesses done, did you re-route the harness to exit on the timing belt side instead of the distributor side or did you just lengthen it and run it behind the intake manifold then through the hole in the firewall on the passenger side?


--------------------
IPB Image
Project ST204.5 99.88946% complete...
 
Start new topic
Replies
post Oct 21, 2005 - 10:48 PM
+Quote Post
Dr_Tweak



Enthusiast
*****
Joined Mar 31, '04
From Summerville, SC
Currently Offline

Reputation: 5 (100%)




I did a 3SGTE/ST harness for someone yesterday and was doing some thinking. The 3SGTE harness is actually just as long as the stock USDM Celica harness, but the wiring is routed the wrong way coming from the injector side of the engine. It wouldn't be that difficult to cut open all that looming, route the wiring out the back of it, and have a very clean harness that didn't need to be extended at all.

That probably doesn't make any sense unless you've compared these harnesses side by side, then you probably know exactly what I'm talking about biggrin.gif


--------------------
-Dr Tweak, 6GC's resident engine swap wiring expert extraordinaire
Click here to see my swaps
drtweak@phoenixtuning.com


Posts in this topic
- WannabeGT4   3SGTE Harness Routing and Lengthening   Oct 20, 2005 - 8:25 PM
- - jgreening   QUOTE(WannabeGT4 @ Oct 20, 2005 - 8:25 PM)Whe...   Oct 20, 2005 - 8:42 PM
- - WannabeGT4   Sorry, I think I phrased my question wrong. You...   Oct 20, 2005 - 8:48 PM
- - jgreening   You know what, I think I remember that mine is dif...   Oct 20, 2005 - 8:50 PM
- - defgeph   do one wire at a time use heat shrink tubing at al...   Oct 20, 2005 - 9:05 PM
|- - WannabeGT4   QUOTE(defgeph @ Oct 20, 2005 - 9:05 PM)do one...   Oct 20, 2005 - 9:09 PM
- - lagos   i cut a hole right behind my ecu so that i wouldnt...   Oct 20, 2005 - 9:05 PM
- - defgeph   dizzy side. To many wires to have it routed fro...   Oct 20, 2005 - 9:13 PM
- - WannabeGT4   The 5S harness comes from the timing belt side doe...   Oct 20, 2005 - 9:21 PM
- - defgeph   Makes sense. But It might clutter up your engine b...   Oct 20, 2005 - 9:27 PM
- - lagos   QUOTE(WannabeGT4 @ Oct 20, 2005 - 9:21 PM)The...   Oct 20, 2005 - 9:47 PM
- - Rjb23   Lengthening it 30 or so inches is gonna take way l...   Oct 20, 2005 - 10:00 PM
- - defgeph   I did it in 2 1/2 hours by myself. I know its not ...   Oct 20, 2005 - 11:05 PM
- - lagos   jeff, when you did yours... did you just use the s...   Oct 21, 2005 - 12:01 AM
|- - defgeph   QUOTE(lagos @ Oct 21, 2005 - 12:01 AM)jeff, w...   Oct 21, 2005 - 12:07 AM
- - WannabeGT4   QUOTE(defgeph @ Oct 20, 2005 - 9:27 PM)Makes ...   Oct 21, 2005 - 8:38 AM
- - defgeph   there is not that much room to have all those wire...   Oct 21, 2005 - 9:42 AM
- - WannabeGT4   ??? It looks like there is plenty of room to me.   Oct 21, 2005 - 10:01 AM
- - defgeph   Again its up to you. There is alot of heat in that...   Oct 21, 2005 - 10:31 AM
- - WannabeGT4   Thanks every one for the input. You've all bee...   Oct 21, 2005 - 10:51 AM
- - lagos   WannabeGT4 ahh i know what you mean... i dont th...   Oct 21, 2005 - 11:37 AM
- - WannabeGT4   I think I can get it to work. I'll just length...   Oct 21, 2005 - 12:23 PM
- - Dr_Tweak   I did a 3SGTE/ST harness for someone yesterday and...   Oct 21, 2005 - 10:48 PM
|- - WannabeGT4   QUOTE(Dr_Tweak @ Oct 21, 2005 - 10:48 PM)I di...   Oct 22, 2005 - 11:51 AM
- - scothaniel   QUOTEIt wouldn't be that difficult to cut open...   Nov 1, 2005 - 11:03 AM
- - Dr_Tweak   Yes, that's exactly right, since it's sequ...   Nov 1, 2005 - 11:45 PM
- - scothaniel   Well, that was just one example. Nearly all the wi...   Nov 2, 2005 - 10:38 AM


Reply to this topicStart new topic
11 User(s) are reading this topic (11 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: January 12th, 2025 - 8:49 AM