A couple questions regarding swap Options

[RbrtNdrws]

Hello,
I was just wondering where I can get a good downpipe for doing my 3sgte swap. I've seen alot of crappy ones on ebay, but I want a quality one thats not too expensive. Can I order it from somewhere online?

My second question is this: I am planning on using the GT transmission with the 3sgte, and I want to know which clutch would be best for this application? If there is a place that it can be ordered from online, please let me know.

Thanks for all the help,
Rob

[WannabeGT4]

i wouldnt recomend a 5sfe disk. my last clutch was fine at 10psi but started sliping when i turned up the boost and had to be replaced after about 6 moths.

try specclutch.com they can make you a 3sgte disk that will fit your 5sfe tranny. they also have the torque rating of what each clutch can hold, so u can pick based on your power goals.
[right][snapback]347680[/snapback][/right]

I thought I could take the parts from the Spec and put the appropriate 3sgte parts to make it work.. Arrg lol. 

Ok someone tell me everything I need to make the 5sfe transmission work with the 3sgte.. Which clutch parts from which engine..

Also, cant i use the pressure plate from the clip that I'm getting?
[right][snapback]348162[/snapback][/right]

Lagos answered it right there.

What you need:
3SGTE Flywheel
3SGTE Pressure plate
3SGTE Clutch disc with splines for 5SFE (custom made by spec)
5SFE throw out bearing