V-6 Camry axle and alltrac axles are different |
V-6 Camry axle and alltrac axles are different |
Oct 23, 2005 - 8:37 PM |
|
Enthusiast Joined Nov 12, '02 From Columbus, Ohio Currently Offline Reputation: 15 (100%) |
We all thought that they are identical. As a matter of fact, the hub end has the same number of splines. BUT, it is not the same size. So the camry axle will not fit in our 6gen hubs. So after I learned this I figured I would take the inner cv joint apart and put it on my broken st185 axle. The inner pieces on this end are different sizes as well. The shaft is different. And the grooves of the bearing are different. Here's a pic. Guys this really sucks, less availability.
st185 on left,,camry on right st185 spline hole is bigger. The small spaces between the ball bearing grooves are wider on the st185. steve |
Oct 24, 2005 - 12:35 PM |
|
Enthusiast Joined Nov 12, '02 From Columbus, Ohio Currently Offline Reputation: 15 (100%) |
The lengths are identical, but the splines on both ends are different.
|
Lo-Fi Version | Time is now: December 12th, 2024 - 9:15 AM |