V-6 Camry axle and alltrac axles are different |
V-6 Camry axle and alltrac axles are different |
Oct 23, 2005 - 8:37 PM |
|
Enthusiast Joined Nov 12, '02 From Columbus, Ohio Currently Offline Reputation: 15 (100%) |
We all thought that they are identical. As a matter of fact, the hub end has the same number of splines. BUT, it is not the same size. So the camry axle will not fit in our 6gen hubs. So after I learned this I figured I would take the inner cv joint apart and put it on my broken st185 axle. The inner pieces on this end are different sizes as well. The shaft is different. And the grooves of the bearing are different. Here's a pic. Guys this really sucks, less availability.
st185 on left,,camry on right st185 spline hole is bigger. The small spaces between the ball bearing grooves are wider on the st185. steve |
Oct 27, 2005 - 3:55 PM |
|
Enthusiast Joined Jun 4, '04 From Northern New Jersey Currently Offline Reputation: 2 (100%) |
im getting lost again...so what IS the correct combo?!? from what i've read from the past threads its 91 camry outer with mr2t inners (gutta be same year as tranny). and this just occured to me but say u were to use the solara or camry v6 tranny...what inners have to be used???
bboy -------------------- ..(formerly daily driven) 3S-GTE powered celica currently set @ 12psi.. |
Lo-Fi Version | Time is now: December 4th, 2024 - 2:24 PM |