 BAD PROBLEMS! |
 Oct 31, 2005 - 8:04 AM
|
 
|
|
Enthusiast Joined Oct 15, '05 Currently Offline Reputation: 0 (0%)  |
I have quite a few problems. First of all, I'm 2000 miles over an oil change, Let's just put that on the table. My problems include:
*rev limiting at 4200 RPM, with MAP unhooked reached 6200rpm but had definite knocks in the pistons (REAL bad timing) *idle shakes like you've never seen before. I mean I'm talkin about like the vibrating beds at the motels that shake vibrate. *I have been gettting EGR CEL engine codes but they've gone away after some re-routing Help me with my celica. I know for a fact that all four mounts need to be replaced (162,000m) that would probably eliminate the shaking. I did also notice that my #1 fuel injector seemed to fit very "loosely". Could a faulty injector be the problem? Help me out 6gC Buds |
 |
Replies
|
Oct 31, 2005 - 10:21 AM
|
|
 Enthusiast  Joined Apr 18, '05 From Lincoln, Ar Currently Offline Reputation: 7 (100%) |
Without the MAP sensor, you will be running either too rich too lean. Your ECU can never tell. It also controls your ideling. Hook it back up! ASAP!
Mounts don't need replace unless they are torn, damaged or broken. Do not fix wat is not broken. |
Posts in this topic
dwg BAD PROBLEMS! Oct 31, 2005 - 8:04 AM
dwg Also, unplugged the O2 Sensor with no noticable di... Oct 31, 2005 - 8:32 AM K-ESD i'm no expert but i'd check the timing bel... Oct 31, 2005 - 12:28 PM 95CelicaST maybe, I dont know, change the oil while you'r... Nov 2, 2005 - 1:09 PM Supersprynt Check sparks, plugs, wires, cap, rotor... Nov 2, 2005 - 1:25 PM dwg ok guys... I changed the oil, changed the transaxl... Nov 3, 2005 - 2:41 PM dwg wow thanks for all that useful information! Nov 4, 2005 - 4:30 PM lagos when and how did this 1st start. you said the moto... Nov 4, 2005 - 4:43 PM presure2 well #1 you SHOULD NOT be driving or reving your m... Nov 4, 2005 - 5:28 PM Supersprynt I agree, having ur revs limited is not fuel delive... Nov 4, 2005 - 5:40 PM dwg Right now I have unhooked the exhaust directly fro... Nov 4, 2005 - 6:12 PM mark_426 give us some details about your car, it helps a bi... Nov 4, 2005 - 10:14 PM lagos check your codes...if its the ignitor it will thow... Nov 4, 2005 - 10:43 PM PhillyGuy086 when was the last time if at all the timing belt w... Nov 5, 2005 - 7:57 AM dwg The timing belt cover has been warped and the gask... Nov 5, 2005 - 4:37 PM presure2 like art said, id start with a new cap and rotor, ... Nov 5, 2005 - 5:03 PM
lagos sounds like that migh be your problem ...get a new... Nov 5, 2005 - 5:38 PM |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 1st, 2024 - 7:43 PM |