 V-6 Camry axle and alltrac axles are different |
 Oct 23, 2005 - 8:37 PM
|
 
|
 Enthusiast  Joined Nov 12, '02 From Columbus, Ohio Currently Offline Reputation: 15 (100%)  |
We all thought that they are identical. As a matter of fact, the hub end has the same number of splines. BUT, it is not the same size. So the camry axle will not fit in our 6gen hubs. So after I learned this I figured I would take the inner cv joint apart and put it on my broken st185 axle. The inner pieces on this end are different sizes as well. The shaft is different. And the grooves of the bearing are different. Here's a pic. Guys this really sucks, less availability.
st185 on left,,camry on right st185 spline hole is bigger. The small spaces between the ball bearing grooves are wider on the st185.   steve |
 |
Replies
|
Oct 31, 2005 - 3:59 PM
|
|
 Enthusiast Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
What kind of LSD, supposedly mines TRD LSD which is a clutch type.
Looking into it, I have good reason to believe I have the wrong passenger side axle in, causing an oil leak, i dont know if its causing any damage, because the splines are simply too long, causing a gap. This post has been edited by Supersprynt: Oct 31, 2005 - 4:21 PM -------------------- |
Posts in this topic
celica3sgte V-6 Camry axle and alltrac axles are different Oct 23, 2005 - 8:37 PM
jgreening Kuya1284 (Ray Flores) used 1990 Camry V6 outters b... Oct 23, 2005 - 8:54 PM Supersprynt As far as I know the length of the axles are the s... Oct 23, 2005 - 8:57 PM BBoYRuGGeD i thought 91 camry axles work? so u are all just ... Oct 24, 2005 - 8:33 AM celica3sgte The lengths are identical, but the splines on both... Oct 24, 2005 - 12:35 PM Galcobar Which makes sense, as every time I've seen thi... Oct 25, 2005 - 2:49 PM scothaniel The Camry outer axle is thicker and almost 2... Oct 27, 2005 - 1:47 PM
celica3sgte QUOTE(scothaniel @ Oct 27, 2005 - 11:47 AM)Th... Oct 27, 2005 - 3:34 PM BBoYRuGGeD im getting lost again...so what IS the correct com... Oct 27, 2005 - 3:55 PM celica3sgte The inners have to be the same as the tranny. Mr2... Oct 30, 2005 - 3:39 AM BBoYRuGGeD oh i see thnx for clearing that up steve! ... Oct 30, 2005 - 8:13 AM scothaniel The ST205 axles are all one peice, not a 2-piece i... Oct 30, 2005 - 6:58 PM BBoYRuGGeD thats weird how other people are OK with the lengt... Oct 30, 2005 - 8:00 PM Supersprynt I'll check to see how extended my passenger si... Oct 31, 2005 - 8:50 AM sphinx Hey Steve.
This is going to lead back to the same... Oct 31, 2005 - 12:33 PM scothaniel It depends on which year / model Camry outer axle ... Oct 31, 2005 - 2:55 PM Supersprynt Sphinx you dont have the LSD tranny right? Mine ma... Oct 31, 2005 - 3:22 PM jgreening I have LSD, no noise. Oct 31, 2005 - 3:27 PM scothaniel I have a non-lsd and lsd passenger side MR2 inner ... Oct 31, 2005 - 4:30 PM celica3sgte I'll have to look at what year camry axle I ha... Nov 1, 2005 - 8:24 AM Supersprynt QUOTE(scothaniel @ Oct 31, 2005 - 5:30 PM)I h... Nov 1, 2005 - 8:43 AM sphinx QUOTE(scothaniel @ Oct 31, 2005 - 11:55 AM)It... Nov 1, 2005 - 12:10 PM Supersprynt It could be a lack of oil due to this leak, it cou... Nov 1, 2005 - 12:13 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 12th, 2024 - 9:08 AM |