3SGTE Swap Checklist |
3SGTE Swap Checklist |
Oct 29, 2005 - 5:03 AM |
|
Enthusiast Joined Mar 31, '04 From Summerville, SC Currently Offline Reputation: 5 (100%) |
3SGTE Swap Checklist:
Engine set - $2500 Custom wiring harness from Phoenix Tuning - $350 FMIC - $225 FMIC Piping (4 45* bends, 5 90* bends, couplings and t-bolt clamps)- $300 Auto/manual parts (shifter assembly, cables, master cylinder, clutch lines and pedal assembly) - $300 Passenger side GT mount - $75 Fuel pump - $100 Aftermarket dowpipe - $150 GT a/c lines GT p/s lines Custom bracket for clocked turbo Custom coolant hose (ST) E153 Tranny - $550, LSD E153 closer to $900 ST205 tranny mounts and brackets (or custom) 3SGTE Clutch Kit - $170 MR2 or Solara inner axles, ST205, Camry, or maybe ST185 outers MR2 Center axle carrier FWD tranny linkage conversion (for MR2 tranny) ST205 or GT shifter cables S54 Tranny - $350 Clutch kit - S54 clutch plate, TOB; 3SGTE pressure plate and flywheel (machined) $150 or Custom clutch kit from Spec (good to 420 ft/lbs)- $400 GT axles including center carrier - $120 Front, rear, driver's side GT mounts and brackets GT shifter cables Misc stuff- $800 Optional Items: P/S cooler Gaskets, belts, and maintenance items Guages Anything I missed, and any clarification on the pricing? This post has been edited by Dr_Tweak: Oct 29, 2005 - 11:00 PM -------------------- -Dr Tweak, 6GC's resident engine swap wiring expert extraordinaire Click here to see my swaps drtweak@phoenixtuning.com |
Nov 1, 2005 - 12:15 AM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
timing belt
water pump and gasket rear main seal hose from hell hose from hell on earth valve cover gasket consider new valve cover bolts from twosRus, because the stock screws just come loose and leak tons of oil. new axel seals for the tranny This post has been edited by lagos: Nov 1, 2005 - 12:18 AM -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Lo-Fi Version | Time is now: January 13th, 2025 - 1:19 PM |