6G Celicas Forums

Welcome Guest ( Log In | Register )

> BAD PROBLEMS!
post Oct 31, 2005 - 8:04 AM
+Quote Post
dwg

Enthusiast

Joined Oct 15, '05
Currently Offline

Reputation: 0 (0%)




I have quite a few problems. First of all, I'm 2000 miles over an oil change, Let's just put that on the table. My problems include:

*rev limiting at 4200 RPM, with MAP unhooked reached 6200rpm but had definite knocks in the pistons (REAL bad timing)
*idle shakes like you've never seen before. I mean I'm talkin about like the vibrating beds at the motels that shake vibrate.
*I have been gettting EGR CEL engine codes but they've gone away after some re-routing

Help me with my celica. I know for a fact that all four mounts need to be replaced (162,000m) that would probably eliminate the shaking. I did also notice that my #1 fuel injector seemed to fit very "loosely". Could a faulty injector be the problem? Help me out 6gC Buds
 
Start new topic
Replies
post Nov 5, 2005 - 7:57 AM
+Quote Post
PhillyGuy086



Enthusiast
**
Joined Sep 18, '03
From Dirty Jersey
Currently Offline

Reputation: 0 (0%)




when was the last time if at all the timing belt was replaced?...if it has never been replaced it might be worn down and messed up. it is also good if u dont know when it was replaced if at all to go ahead and do that anyways just for regular maitenence

Posts in this topic
- dwg   BAD PROBLEMS!   Oct 31, 2005 - 8:04 AM
- - dwg   Also, unplugged the O2 Sensor with no noticable di...   Oct 31, 2005 - 8:32 AM
- - soulshadow   Without the MAP sensor, you will be running either...   Oct 31, 2005 - 10:21 AM
- - K-ESD   i'm no expert but i'd check the timing bel...   Oct 31, 2005 - 12:28 PM
- - 95CelicaST   maybe, I dont know, change the oil while you'r...   Nov 2, 2005 - 1:09 PM
- - Supersprynt   Check sparks, plugs, wires, cap, rotor...   Nov 2, 2005 - 1:25 PM
- - dwg   ok guys... I changed the oil, changed the transaxl...   Nov 3, 2005 - 2:41 PM
- - dwg   wow thanks for all that useful information!   Nov 4, 2005 - 4:30 PM
- - lagos   when and how did this 1st start. you said the moto...   Nov 4, 2005 - 4:43 PM
- - presure2   well #1 you SHOULD NOT be driving or reving your m...   Nov 4, 2005 - 5:28 PM
- - Supersprynt   I agree, having ur revs limited is not fuel delive...   Nov 4, 2005 - 5:40 PM
- - dwg   Right now I have unhooked the exhaust directly fro...   Nov 4, 2005 - 6:12 PM
- - mark_426   give us some details about your car, it helps a bi...   Nov 4, 2005 - 10:14 PM
- - lagos   check your codes...if its the ignitor it will thow...   Nov 4, 2005 - 10:43 PM
- - PhillyGuy086   when was the last time if at all the timing belt w...   Nov 5, 2005 - 7:57 AM
- - dwg   The timing belt cover has been warped and the gask...   Nov 5, 2005 - 4:37 PM
- - presure2   like art said, id start with a new cap and rotor, ...   Nov 5, 2005 - 5:03 PM
- - lagos   sounds like that migh be your problem ...get a new...   Nov 5, 2005 - 5:38 PM


Reply to this topicStart new topic
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 1st, 2024 - 7:42 PM