3sgte swappers.. no start..., starter seems to ingage and not stop |
3sgte swappers.. no start..., starter seems to ingage and not stop |
Oct 21, 2005 - 1:51 AM |
|
Enthusiast Joined Sep 9, '02 From Scranton, Pa Currently Offline Reputation: 7 (100%) |
i have to pull the battery to stop it from cranking. other than this, whats some common problems that will stop the dis from fireing..
|
Nov 5, 2005 - 5:19 PM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
QUOTE(DG_Performance @ Nov 5, 2005 - 4:56 PM) QUOTE(lagos @ Oct 20, 2005 - 11:56 PM) who did your harness? i know on mine dave forgot to connect a wire that provides the ignitor and coil with power. [right][snapback]347297[/snapback][/right] "dave forgot to connect a wire", you are right, just one wire can cause a swap not to work. BUT... you forgot to mention that i talked you through every little step on how to track down the problem to see what was going on. i was on the phone with you every day till we tracked down the missing wire (i felt like a swap hotline or something) ..... and i answered the phone every time you called me with other swap things you were not sure about also! this is the cool thing about me doing harnesses for people....i talk you through everything untill you car is up and running! dg [right][snapback]353528[/snapback][/right] yaeh man, u really did. thanks again. i hope what i posted didnt sound like i was unhappy with you work, cause thats not the case at all. i was just trying to say that you forgot a wire that sends all the power to the coil and ignitor, and that might be zips issue too . my igintor harness plug also had a short in it (not at all your fauld), must have been and issue for the car back in japan . that was kind of what was messing me up the most, cause after i hooked up the one wire u forgot, it sill wouldnt run, then one day, like magic it came to life. i drove around with it like that for a few months and the problem came back.... had to go back and look through every wire to find out what was causing the issue... ended up replacing the ignitor harness plug and that fixed it. so maybe zip has something similar going on? DG is a great guy to do anyones harness. he does a good job, and if there are any issues, hes always there to back u up till you get your car runnings. i always send people your way when they tell me they are doing a swap. you get high recomendations from me dave! This post has been edited by lagos: Nov 5, 2005 - 5:25 PM -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Lo-Fi Version | Time is now: January 12th, 2025 - 5:58 AM |