HKS Style SSQV KnockOff, Opinions? Options

[BBoYRuGGeD]

Whats up guys...from those who have and have tried these HKS SSQV style BOV's (dan i think ur FOR it right?) how do u like 'em? think theyre as good as the real thing? id get the real thing but i wouldnt wunna pay for something that i can get a same exact copy of that works the same way for a fraction of the price.

bboy

[lagos]

you cant just drill a hole. you need to have a short pipe welded on there so that you can fit a 1in hose over it. remember all that stuff has to be air tight. your car will not run right there is even a small air leak there.

for mine, i was going to buy a straight intake pipe and weld all the connections on there that i need.

[Dr_Tweak]

you cant just drill a hole. you need to have a short pipe welded on there so that you can fit a 1in hose over it. remember all that stuff has to be air tight. your car will not run right there is even a small air leak there.

Word. Of course your piping is aluminum, which most people can weld. That said, if you're on a budget, you can get yourself a 1" tube, cut it down, drill a 1" hole in the intake, put the tube in there, and JB Weld it in place. (Yes, I said JB Weld). Or use epoxy. It will hold fine, be airtight, and since the hose will be over it anyway, it won't show.

-Doc