So Im rebuilding a beams motor...., Who wants to touch me. :P Options

[roman]

Hi folks.

A few of you guys here seem pretty interested in the beams motor.

Well I am rebuilding one at the moment.

I know quite a lot about these engines, as I have been researching for the last year or so, trying to find out information here and there.

I have the motor in bits at the moment, my hands are tied until I get my bottom end bearings.

So if you have any questions, or would like to see any pics etc, let me know.

My motor has a port & polished head (Which was done by an unknown company in Japan) heat wrapped TOMs extractrors, Apexi intake, cusco paddle clutch, light weight cusco flywheel, balanced crank/rods/pistons/flywheel, and the cat has been replaced with a straight through pipe.

Hopefully it will make in the region of 210-220 flywheel hp, or about 180-185 hp at the wheels.

And BTW it will be going into a 1050kg MR2.

This post has been edited by roman: Dec 7, 2005 - 2:56 AM

[Magic]

I think there is an owner here with Beams VVTi (SS3) and he had the 197whp....anyway the engine has the potential for this kind of power so dont worry.
maikl cannot join the internet so often but if you need to ask him anythim pm so i can give you his phone number..

Did you seen my post for the Beams Exhaust Manifold by Beams? Have a look on it...

http://www.6gc.net/forums/index.php?showto...xhaust+manifold