spark plug wires, help Options

[SiN_CeLi]

I recently changed my spark plugs on my 5sfe and as I pulled the spark plug wire out the little boot on the bottom of the plug wire stayed attached to the spark plug but the rest of the spark plug wire came out. I was wondering if anyone one has had the same problem with the little rubber boot getting stuck. if so howdid u guys manage to get it out short of taking off the head.I tried needle nose pliers and some lube to try and get it unstuck but have been unsuccesfull.Any ideas appreciated.

[Bigmeanbulldog55]

I'd just remove the plug if I were you. Take the hole thing out of there. You could cut the rubber as much as you can with snips and a knife so you can get to the plug. I'd replace the wires and plugs while your at it because that kind of wear means old plugs and wires. Besides, it's just kind of a good idea every now and then.