![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 15, '05 From Toronto Currently Offline Reputation: 4 (100%) ![]() |
Ok, so im still thinkin of duin a 5sfte kit, and the stupid 3s map sensor is 2 hard/2 expensive to find, but since i used 2 b a part of the supra comunity here in toronto, i have access to any thing that ever came on a supra for cheap. So i was wondering, would a map sensor off a 7MGE or 7MGTE work for the 5sfe turbo setup??..if so i should take a walk over 2 my grandparents place and grab the one on my supra off it.
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 18, '05 From Lincoln, Ar Currently Offline Reputation: 7 (100%) ![]() |
It should work as long as it has the same amount of wires going into it and out of it.
You might just have to find which wires are which and cut and splice unless they hook right up. Im guessing the 5S has about 3 wires going into it so the 7M might have the same amount too, unless its a MAF type sensor, then its not possible. |
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 3:14 PM |