3SGTE with auto tranny, Is it as easy as bolting on? |
3SGTE with auto tranny, Is it as easy as bolting on? |
Dec 9, 2005 - 8:59 AM |
|
Enthusiast Joined Sep 27, '04 From Texas Currently Offline Reputation: 1 (100%) |
I've looked through all the stickies and did some searching so NO BASHING.
It seems like everyone who has a 3sgte has a manual tranny. I'd like to know why. Is it because of the whole manual is more fun thing or is it because an auto tranny isn't possible. Also, when I say auto tranny bolt-on, I mean will it stay a front wheel drive. I don't want to do any rear-wheel or all-wheel drive conversions. If I do the swap, I'd like an auto for a daily driver because shifting all the time in traffic sucks. With all this, here's my main question: Are there any auto transmissions that will simply bolt on to a 3sgte motor and keep it front wheel drive? If someone has the answer, please post it. --Bill |
Dec 9, 2005 - 11:07 AM |
|
Enthusiast Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) |
What I've gathered so far:
http://www.6gc.net/forums/index.php?showtopic=26475 http://www.6gc.net/forums/index.php?showtopic=26491 1. An auto trans will bolt up to a 3SGTE. 2. The flexplate will NOT bolt to the 3SGTE crank. (Confirmed 10-11-2006) It will need machined to fit the larger bolts. 3. The 6th gen trans is computer controlled so you'll need the 5SFE's auto ECU to control it. 4. The BGB's at celicatech will be your best resource: http://www.celicatech.com/imagearchive/bgbonline/bgb.php#6th This post has been edited by WannabeGT4: Oct 11, 2006 - 10:15 PM -------------------- Project ST204.5 99.88946% complete... |
Dec 9, 2005 - 11:33 AM |
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
QUOTE(WannabeGT4 @ Dec 9, 2005 - 10:07 AM) [snapback]365243[/snapback] What I've gathered so far: http://www.6gc.net/forums/index.php?showtopic=26475 http://www.6gc.net/forums/index.php?showtopic=26491 1. An auto trans will bolt up to a 3SGTE. 2. The flexplate will bolt to the 3SGTE crank. 3. The 6th gen trans is computer controlled so you'll need the 5SFE's auto ECU to control it. 4. The BGB's at celicatech will be your best resource: http://www.celicatech.com/imagearchive/bgbonline/bgb.php#6th The mechanical part won't be the problem. How are you going to run the 3sgte engine off the 5sfe ECU? I am pretty sure you will need a standalone computer to do it. Edit: nevermind, I just read the threads that you posted. Interesting approach. I think its going to be tricky. This post has been edited by jgreening: Dec 9, 2005 - 11:46 AM -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
Lo-Fi Version | Time is now: November 26th, 2024 - 9:17 AM |