PROJECT UPDATE, PICS!!! Options

[celicaracer18]

Well its been a while since i have updated my project, in fact i think some people have forgoten me lol.
I haven't had much time to get on here as much lately due to work and school and working on the car, plus i have found the love of my life and that has taken up some time as well (not complaining)

well i the car is back together, still no motor but i can honestly say without any doubt that it won't be much longer. I dropped it off at XAT in Tampa this past weekend. I also headed down to Miam and caught the last HIN show on the mainland, very nice, tons of awsome cars. but anyways back to the update

in the past few weeks here is what i have been doing:

1 - Wired everything (from scratch) thats not related to the motor, and everything works (going stand alone BTW)
2 - Sanded the entire Car to bare metal.
3 - Primered out the car (until it gets back from XAT, you will have to wait till then to see what color it will be.)
4 - Mounted Mounted Rear lip securely
5 - Mounted Lambo Door hinges
6 - Mounted fenders (some adjusting left)
7 - Front bumper has some work left, that will get done at XAT along with getting the Sideskirts installed.
8 - Cut and mounted Diamondplate for floorpans and rear side panels.
9 - Repainted interior with one thick solid coat of bedliner.
10 - Mounted Speakers, Fuel Cells, Battery Box, and Seats

At XAt the car will Recieve:
4th gen 3sgte w/ MR2 lsd tranny, Custom Large PWR FMIC and all 3" Piping HKS SSQV BOV, 3" Turbo Back exhaust, Apexi AVC-R, Machine Work (Bore, port & polished head, balance & blue printed block, knife edged Crank), Stand Alone Engine Management (XAT MQ), Custom equal length turbo manifold, Turbonetics T3/T04e 60-1 ball bearing Turbo, Tial Wastegate, 850cc injectors, Inline Fuel Pump, SS Braided Fuel lines, Fal Fans, HKS cams

along with the parts i have installed:
Wiseco Piston kit
Crower Pro Billet Rods
King Engine Bearings
Cometic Custom Head Gasket
ARP Studs
Ferrea 1mm Oversized intake and exhaust Valves
Ferrea Double Valve Springs
Ferrea Valve Spring Retainers
Ferrea Valve Spring Seat Locators
Koyo Radiator
Fidanza Flywheel
Exedy Clutch
Billet Intake Manifold
75mm Throttle body

i also have 17" wheels, Tien SS suspension, CF Hood and hatch and few other small goodies to go on when i get it back and paint it.

so there ya go i think thats all the info.


and here are the pics

[TheStreetzKing]

yea well it was a good alternative for temp. using the stock seat belt sucked in that hole trying to buckle in, imma get a bar soon