7A-FTE PICS on a 97 Corolla, 7A-FTE all custom Options

[toytech]

I thought you 6gens might like to see the 7A-FTE on a 97 Corolla.

All the work is custom and powder coated, let me know what you think of it.
Thanks, Steve

Running, 6psi daily-dyno'd at 150 to the wheels on auto tranny w/ high stall level ten stage 3 tq convertor(which is for sale)!
Stock internals and Emanage!






This post has been edited by toytech: Dec 16, 2005 - 3:31 PM

[nik]

yep same here! I already have the larger throttle body and the p&p is in the process of being done, as well a 3 angle valve job as well as stiffer springs. then it's onto forged pistons and rods an a overbore of .020. When all is said and done, I should be sitting either right at 300 or a little bit above.

Is that to the ground or crank? what are you going to use for ems

http://www.atomicspeedware.com/pauttoy.htm

these are really nice rods i have a set and about 4 times beefer than stock

This post has been edited by nik: Dec 20, 2005 - 11:10 AM

[toytech]

yep same here! I already have the larger throttle body and the p&p is in the process of being done, as well a 3 angle valve job as well as stiffer springs. then it's onto forged pistons and rods an a overbore of .020. When all is said and done, I should be sitting either right at 300 or a little bit above.

Is that to the ground or crank? what are you going to use for ems

http://www.atomicspeedware.com/pauttoy.htm

these are really nice rods i have a set and about 4 times beefer than stock

I hope it will be to the ground, and I am using the emanage to control the motor.

Yep, those are the rods I am looking to get.


as far as the position of the wastegate, it looks crappy in the in the pic, but it is actually in a great position if you saw if up close, you would see what I am talking about.