FS: 1999 SS3 BEAMS 3SGE engine/trans/WIRING/ECU Options

[rascaca]

If anyone is interested, I have another one available, asking 2300$+ shipping since it has a slightly dented manifold:







ECU is included but not pictured

email me at craynauld@videotron.ca if you are interested

it has unknown mileage but its in the 40k miles ballpark, i didn't get the cluster


The transmission is lsd but I do not have the axles(I can find the part number though). Comes with uncut harness up to ECU. I will include The 2000 TOYOTA EPC on DVD which included all the beams part numbers so that you can order them at either www.toyotaworld.com (USA) or www.fensport.com (UK).


asking 2300$ usd + shipping(shipping is around 300$)

I'm from the MR2 board(www.mr2oc.com)
IF you want to check my feedback(100+ positive ones) :
click here


email me at craynauld@videotron.ca for more info
Thanks
Chris

This post has been edited by rascaca: Dec 21, 2006 - 12:34 AM

[Outsider]

It took me about 2 weeks total to do the wiring harness. (actual work time).
I had to source out all the wiring diagrams. (waiting for data, info and new parts- about 8 months).

Now that I look back, I would say that on a scale of 1 to 10 this swap is about a 3 or 4. Mechanically identical, everything bolts up. Had I known then what I know now, it would have taken me about 2 to 3 weeks total time. Not much changes in the harness, most time was spent rerouting the harness to the passengers side.It's not hard, just time consuming.