 ebay shifter, need help |
 Jan 16, 2006 - 10:49 PM
|
 
|
 Enthusiast  Joined Dec 22, '05 From STL Currently Offline Reputation: 0 (0%)  |
Well I bought a 7th gen Celica shifter off of ebay and put it in today. I took the clip off (the one holding the pin in front of the shifter) and it broke. Does any one know where I can get one. Also I never used the shift mechanism lifters. I could not get my hand in the space and the bolts supplied by the kit were not long enough. This is the best $30 I have spent on my car but I put the lifters in will it make it a smother shift. Thanks in advance for any help.
-------------------- 7a-fte in progress
still need a manifold, fuel pump, greddy e-manage, and oil lines / water lines |
 |
Replies
|
Jan 17, 2006 - 12:18 AM
|
|
 Enthusiast Joined Oct 10, '05 From San Diego Currently Offline Reputation: 2 (100%) |
scroll down to batman's second post
BAM ---> http://www.6gc.net/forums/index.php?showtopic=22975&st=20 i didnt put the lifters in at first and the bottom cup rubbed on the floor. so i put the back two in and it was perfect. it took a while because it was hard to get my hand in there. i think i held them in place with pliers This post has been edited by dlx742: Jan 17, 2006 - 12:19 AM |
Posts in this topic
SHERMAN ebay shifter Jan 16, 2006 - 10:49 PM
djultimate i drilled a tiny hole through the pin and stuck a ... Jan 17, 2006 - 12:04 AM Bigmeanbulldog55 Can I re-use my stock knob with the 7th gen shifte... Jan 17, 2006 - 11:08 AM
Batman722 QUOTE(Bigmeanbulldog55 @ Jan 17, 2006 - ... Jan 17, 2006 - 11:49 AM SHERMAN That is a good idea about the pin and drilling a h... Jan 17, 2006 - 1:03 PM lilsteeg im new so this may be a dumb question but the 7th ... Jan 17, 2006 - 3:57 PM 1900WattCelica QUOTE(lilsteeg @ Jan 17, 2006 - 2:57... Jan 17, 2006 - 4:17 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 22nd, 2025 - 1:04 AM |