 chargecooler |
 Jan 16, 2006 - 5:30 PM
|
 
|
|
Enthusiast  Joined Apr 23, '05 From kent Currently Offline Reputation: 0 (0%)  |
right i have trawled for weeks now to find out how to get the st205 IC pump to run constantly. i know i could just put a live feed and earth to it and run it off a switch but its my understanding that its connected to the ecu and will therefore put the engine check light on. Someone please help me...!!!!!
oh and for a nice easy mod on the stock st205 chargecooler clean out with petrol or a very high quality de greaser and apply heat shielding to the underside and you will see charge temps drop dramatically.... i was seeing 50-55 deg centigrade at 1.1 bar of boost and a ambient temp of about 7degrees centigrade, i am now seeing 30-35 at the same boost pressure and same ambient temp and i am yet to finish the heat shielding properly. NOTE when you flush the chargecooler, if there was a fair amount of oil in there it will smoke heavily as the deposits gradually work their way out. 
|
 |
Replies
|
Jan 22, 2006 - 10:13 AM
|
|
|
Enthusiast Joined Apr 23, '05 From kent Currently Offline Reputation: 0 (0%) |
back to the drawing board methinks. earth the blue wire and after 30secs the light comes on (prob when the ecu is trying to turn the pump off???)
|
Posts in this topic
dan4 chargecooler Jan 16, 2006 - 5:30 PM
lagos http://celicatech.com/forums/showthread.php?t=1111... Jan 16, 2006 - 5:42 PM dan4 i dont think you understood fully.... i dont have ... Jan 16, 2006 - 5:45 PM Supersprynt I have the pump running off my ignition switch - a... Jan 16, 2006 - 5:53 PM dan4 how do you stop the ecu error code 54 appearing?... Jan 16, 2006 - 5:57 PM dan4 how do you stop the ecu error code 54 appearing?... Jan 16, 2006 - 5:57 PM Supersprynt I have an ST185 3s w/ST185RC intercooler so I dont... Jan 16, 2006 - 9:20 PM defgeph you need to ground a pink wire on your ecu. Thats ... Jan 16, 2006 - 9:24 PM defgeph link Jan 16, 2006 - 9:33 PM dan4 right i have the wiring diagram which shows three ... Jan 17, 2006 - 12:14 PM defgeph I'm not sure what to ground on the 205. Maybe ... Jan 17, 2006 - 1:18 PM
WannabeGT4 QUOTE(defgeph @ Jan 17, 2006 - 12:18... Jan 17, 2006 - 2:09 PM WannabeGT4 Splice into the blue wire on the 26 pin ECU connec... Jan 17, 2006 - 3:43 PM dan4 this might help understand, i havent really had a ... Jan 18, 2006 - 8:43 AM WannabeGT4 I found this scan to be quite helpful as well:
htt... Jan 18, 2006 - 10:15 AM WannabeGT4 I was afraid of that. If you can measure the volta... Jan 22, 2006 - 10:29 AM dan4 same idea as i had although i ran out of light and... Jan 22, 2006 - 10:34 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 2nd, 2024 - 2:08 PM |