 Problem after timing belt replacment, engine light on., Car only revs to 5200 rpm and drops when held(auto) |
 Jan 29, 2006 - 9:50 PM
|
 
|
|
Enthusiast Joined Nov 21, '05 From New Mexico, USA Currently Offline Reputation: 0 (0%)  |
My friends brother replaced the timing belt (it was the complete kit) The timing mark is zeroed out and 10 degrees advanced. We took the valve cover off to check if the timing marks were alligned and they were. The car starts and is idling normal, but when I rev the car up in neutral it will not go past 5200 rpm and falls down once it hits that range no matter throttle position. When driving the car it accelerates slow and shifts way too soon. By 25mph the car shifts into 3rd gear. Normally at 25mph when I stomp the pedal the car jumps into the 5000rpm range in first gear. Instead it jumps to about 3200rpm then falls off. We figure it must be a sensor or wire, but we are not sure. If you guys have an idea of which sensor it is or what is going on please post. My friend found a broken sensor.
 |
 |
Replies
|
Jan 31, 2006 - 1:17 PM
|
|
 Moderator  Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
lemme know if your car is cali or non cali spec, and i can get the PT # 4 u
-------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
Posts in this topic
Driftz Problem after timing belt replacment, engine light on. Jan 29, 2006 - 9:50 PM
Hanyo i think that is the cold idel senser.
That sense... Jan 29, 2006 - 10:03 PM Driftz That makes since to me, now that I think about it ... Jan 31, 2006 - 1:04 PM
Driftz The car is a non cali spec. Jan 31, 2006 - 1:41 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 28th, 2024 - 12:33 AM |