![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Nov 3, '05 From Chicago Suburbs Currently Offline Reputation: 1 (100%) ![]() |
http://cgi.ebay.com/ebaymotors/SILVER-BLUE...609165518QQrdZ1
Above link sends you to a product called universal 3a racing shift light, which is not so universal since it needs a aftermarket 3a racing tach to work, but the seller "forgot" to mention it... anyways, i ended up paying $25 for a aluminium tube with 4 led in it ![]() OEM tach gets an input voltage corresponding to the rpms(please correct me if im wrong) if i run a variable resistor from that input to the base of a transistor that would switch 9V to the LEDs, then I will start the car and set the resistance to the low end and rev the car up i will get enough current to the base of the transistor to switch on the LEDs in shiftlight somewhere in low rpm range... then with increasing resistance i will get the LEDs to go on later in rpm range, and that is how i am going to adjust. Am i going to make the tach read unaccuratley? Does tach input wire uses voltage as the only reference to rpms? Is this going to work at all? Thanks for reading/responses! -------------------- QUOTE(tufy @ Jul 19, 2006 - 7:40 AM) [snapback]458074[/snapback] i dont drive fast, i just fly low |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 10, '04 From Shoreline, WA Currently Offline Reputation: 4 (100%) ![]() |
^ that link takes me to the forums home page?
well I kinda think of them the same as i do a 7" tach, does nothing more then make your mods list longer, no offence to anyone. but if your thorwing down lots of power I hope your ready to handel it, and not going off a little light. side note: check out this other auction from the same seller: drift knob Nissan S13/S14 Silvia 240sx Spin Turn Knob "Hand break do not lock for park unless the spin turn knob is pull" I cant say i turst the seller. wooooo yeahhh sweet mod This post has been edited by creis: Feb 3, 2006 - 1:48 AM -------------------- ![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 3, '05 From Hollywood, FL Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(creis @ Feb 3, 2006 - 1:39 AM) [snapback]388430[/snapback] ^ that link takes me to the forums home page? well I kinda think of them the same as i do a 7" tach, does nothing more then make your mods list longer, no offence to anyone. but if your thorwing down lots of power I hope your ready to handel it, and not going off a little light. side note: check out this other auction from the same seller: drift knob Nissan S13/S14 Silvia 240sx Spin Turn Knob "Hand break do not lock for park unless the spin turn knob is pull" I cant say i turst the seller. wooooo yeahhh sweet mod it does sound like it could be useful, but obviously they are just trying to rip people off. -------------------- To live, is to suffer
To survive, thats to find meaning, in the suffering.... ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: February 24th, 2025 - 6:04 AM |