 intercooler piping kit, where can i get them? |
 Feb 5, 2006 - 5:14 PM
|
 
|
|
Enthusiast  Joined Apr 21, '04 Currently Offline Reputation: 0 (0%)  |
edit
This post has been edited by sickman89: Jun 26, 2008 - 6:48 PM |
 |
Replies
|
Feb 13, 2006 - 9:49 AM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
QUOTE I was uping the boost and around 9psi i was blowing off couplers every time i would full throttle it! I was not using t clamps at that time but i just got sick of being under the car on the side of highways! Not Safe... haha. dg crappy clamps will do it every time...lol just for refrence, hyde runs 22+ psi with silicone couplers, and constant tension clamps. no problems. ive hit 15psi @ the track, and run 10+psi daily, and have NEVER had a hose pop off. its all about using the proper clamps and couplers, and getting them good and tight. This post has been edited by presure2: Feb 13, 2006 - 9:56 AM -------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Feb 15, 2006 - 7:34 AM
|
|
 Enthusiast Joined Jun 21, '03 From Pennsylvania Currently Offline Reputation: 3 (100%) |
I would not say crappy clamps will do it every time...lol
and hyde runs 22+ psi with silicone couplers, and constant tension clamps. no problems. I would bet hyde has the extra lips welded on the ends of his piping to help avoid a blow off This post has been edited by DG_Performance: Feb 15, 2006 - 7:35 AM --------------------  |
|
Feb 15, 2006 - 2:51 PM
|
|
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
QUOTE(DG_Performance @ Feb 15, 2006 - 7:34 AM) [snapback]394229[/snapback] I would not say crappy clamps will do it every time...lol and hyde runs 22+ psi with silicone couplers, and constant tension clamps. no problems. I would bet hyde has the extra lips welded on the ends of his piping to help avoid a blow off actually, no, he dont, his whole intercooler setup was bought off ebay.  just a decent core and some bends, nothing out of the ordinary, dave. -------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
Posts in this topic
sickman89 intercooler piping kit Feb 5, 2006 - 5:14 PM
lagos QUOTE(sickman89 @ Feb 5, 2006 - 5:14... Feb 5, 2006 - 5:22 PM DG_Performance I make ic pipe kits for our cars, and there are ot... Feb 8, 2006 - 9:58 PM
jgreening QUOTE(DG_Performance @ Feb 8, 2006 - 8... Feb 8, 2006 - 10:21 PM Negative Yeah but I actually think all the couplers looks s... Feb 9, 2006 - 10:09 AM x_itchy_b_x yeah but it sucks when one blows off on the highwa... Feb 9, 2006 - 10:20 AM DG_Performance QUOTE(x_itchy_b_x @ Feb 9, 2006 - 8... Feb 9, 2006 - 12:16 PM lagos that only happens on those cheap home depo coupler... Feb 9, 2006 - 3:50 PM presure2 QUOTE(lagos @ Feb 9, 2006 - 3:50 PM)... Feb 10, 2006 - 7:50 AM tangcla Problem with the ST205 WTA cooler... true that the... Feb 9, 2006 - 9:38 PM MonsterBOX QUOTE(tangcla @ Feb 9, 2006 - 9:38 P... Feb 15, 2006 - 9:42 PM Magic QUOTE(sickman89 @ Feb 6, 2006 - 12:1... Feb 10, 2006 - 5:41 PM tangcla Magic, do you have any photos/links/details about ... Feb 10, 2006 - 6:25 PM Magic tangcla have a look at Brashboy (www.brashboy.net)... Feb 10, 2006 - 7:11 PM tangcla ouch... I think I might even stick with the top mo... Feb 11, 2006 - 11:43 AM Bigmeanbulldog55 My dad has to use a welded peice on his truck. He... Feb 11, 2006 - 12:51 PM DG_Performance There is not set number where couplers just start ... Feb 13, 2006 - 9:45 AM DG_Performance Direct quote from Jeff Fazio on the mr2 board
... Feb 16, 2006 - 6:34 AM lagos yeah, you cant compare the hardware store junk to ... Feb 13, 2006 - 7:40 PM Consynx Manny, i'm sure someone's done this, but i... Feb 15, 2006 - 4:37 PM presure2 idk steve, never ran the piping in a 5th gen.
id a... Feb 15, 2006 - 6:20 PM lagos QUOTE(MonsterBOX @ Feb 15, 2006 - 9... Feb 15, 2006 - 10:06 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 8:36 PM |