tranny change, now working a "how to" Options

[lake1069]

i brought down my tranny today b/c my clutch was gone, and synchos are mess up. while i was doin it i took some pics, maybe they can help someone down the road. best advice do it with a buddy i spent maybe 6-7 hours on it today and still not finish, with a buddy im sure it would have been less. this weekend will be the interesting thing, the 3rd gear synchro has to be replaced. it was only 29.99 from the dealer but im not gonna pay 400 for someone to put it in. that is all of what i left to do b4 i can put the tranny back on. ill take some more pic while i work on that too.
first i jacked up the car and took the axel off( 45 minutes)


took everything that was in the way off and pulled down the tranny(1.5 hour)


took the old clutch and flywheel off(20 minutes)


had the flywheel turn and put it back on(40 miles and 20 minutes puttin on.)


new clutch set, putting it on ( 1 hour)



This post has been edited by lake1069: Feb 23, 2006 - 12:30 PM

[lake1069]

stepped means turned right? like when u turn a rotor? i had it done, the only thing that has me thinking is those dull spots on the fly wheel, ive never seen those b4. friday i get the synchro in, i have no clue what it looks like or where in the tranny it goes. trial and error along with comparison will be my way of gettin it on there.
-oscar

[presure2]

stepped means turned right? like when u turn a rotor? i had it done, the only thing that has me thinking is those dull spots on the fly wheel, ive never seen those b4. friday i get the synchro in, i have no clue what it looks like or where in the tranny it goes. trial and error along with comparison will be my way of gettin it on there.
-oscar

what we mean by stepped is that the flywheel should have a raised surface on it that the clutch disk meets up to.
i "believe" the step is .20 or somthing like that, i remember my machineshop guy telling me that..