How-To Paint Interior, Make your own Custom Interior Cheap! Options

[Tranceman]

I've had my 96 ST for a week, and this was so simple I thought I'd share it with everyone. I painted a black interior metallic silver, and it came out fantastic. Just follow these steps:

Tools/Equipment:
Flathead Screwdriver, Phillips Screwdriver, Dupli-Color paint of choice (ie-silver), Primer for "Trim Accessories" (choose color closest to what you want, I chose grey), Clear Coat Spray, Rubbing Alcohol, Cottonballs

1. Use the flathead screwdriver to prop the plastic pieces out from the dash. It's best to apply tape to the end of the screwdriver to avoid scratches.

2. When removing the large, center piece around the headunit, be sure to carefully disconnect the 3 plugs attached before yanking the piece away. When removing the lower center piece around the clutch, again be sure to unplug the 3 wires before removing. (If you decide on removing the lower console pieces, you will need to remove several screws with the Phillips screwdriver as well as 2 bolts with a wrench from inside the console itself.)

3. Apply rubbing alcohol to cottonballs and thoroughly wipe down each piece you plan on painting and allow to dry.

4. Apply one coat of primer to each piece and let dry

5. Apply 2-3 coats Dupli-Color to each piece and let dry one hour before applying clear coat

6. Apply 1-2 coats of Clear Coat and let dry

7. Re-install and enjoy!

[Tranceman]

Hey Paul, that's a good question, I'm working on it today, when I get it off I'll tell you how to do it.