How-To Paint Interior, Make your own Custom Interior Cheap! Options

[Tranceman]

I've had my 96 ST for a week, and this was so simple I thought I'd share it with everyone. I painted a black interior metallic silver, and it came out fantastic. Just follow these steps:

Tools/Equipment:
Flathead Screwdriver, Phillips Screwdriver, Dupli-Color paint of choice (ie-silver), Primer for "Trim Accessories" (choose color closest to what you want, I chose grey), Clear Coat Spray, Rubbing Alcohol, Cottonballs

1. Use the flathead screwdriver to prop the plastic pieces out from the dash. It's best to apply tape to the end of the screwdriver to avoid scratches.

2. When removing the large, center piece around the headunit, be sure to carefully disconnect the 3 plugs attached before yanking the piece away. When removing the lower center piece around the clutch, again be sure to unplug the 3 wires before removing. (If you decide on removing the lower console pieces, you will need to remove several screws with the Phillips screwdriver as well as 2 bolts with a wrench from inside the console itself.)

3. Apply rubbing alcohol to cottonballs and thoroughly wipe down each piece you plan on painting and allow to dry.

4. Apply one coat of primer to each piece and let dry

5. Apply 2-3 coats Dupli-Color to each piece and let dry one hour before applying clear coat

6. Apply 1-2 coats of Clear Coat and let dry

7. Re-install and enjoy!

[OneLuv1]

QUOTE (Paul9310 @ Jun 14, 2003 - 1:59 AM)

i was wondering if you did aound the controls for the windows on the doors.  I wanna do mine and that is the only piece i can't figure out how to take out.

i did mine... they are pretty easy to get out, you just gotta put the flathead screwdriver under each end and pop up....
actually, i think thats how i did it... i dont know it was liek two years ago... but thats how i remember doin it...


This post has been edited by OneLuv1: Jun 16, 2003 - 3:49 PM