(!) Signal. What is this?? Help a newbee!!! Options

[Vacchus]

Hello everyone!!
I am a newbee here, and i would like to have your help in a propably stupid question!
For 2-3 days i ve got the (!) signal on left to the rpm meter, and i have no idea what this thing is trying to "say" to me, because everything seem to work fine in my Celica..
This is a signal for a problem or for something else??

Thanks in advance

[Chanh55]

Here you go...couple sources...

http://homepage.ntlworld.com/nick.challone...tech/warns.html
(look at #7)



Here it is copied and pasted, Brake warning light. This light serves two purposes. It illuminates when the handbrake is applied. If it does not extinguish when the handbrake is released, or it illuminates while you are driving, then the brake fluid level is too low.

http://www.carcare.org/Brakes/warning_light.shtml



Description: Located on the instrument panel, this warning light is usually red and labeled BRAKE. The light glows with the ignition switch in the on position.

Purpose: The hydraulic warning light glows when there is a loss of pressure detected in the hydraulic system. On some cars, this light may be used to alert the driver that the brake fluid level is low.

Maintenance Tips/Suggestions: If your car’s BRAKE warning light comes on, check your owner’s manual to find out its meaning. Unlike some warning lights, the BRAKE warning light does not have standard meanings; it may be also be used for multiple purposes. For example, the same light may be used to show that the parking brake is engaged and when the fluid in the master cylinder is low. When in doubt, have the condition checked by a qualified service technician right away. A loss of hydraulic pressure can affect brake operation, which can make your car unsafe.

This post has been edited by Chanh55: Mar 9, 2006 - 1:08 PM