check valves with the safc? Options

[southwest2118]

is there a need for check valves with the safc?



i'm only going to be running like 8 psi?

2bar map? how would i set the safc with something like a GM?

This post has been edited by southwest2118: Mar 10, 2006 - 2:30 AM

[presure2]

i really would stay away from the check valves, and get a 2bar map from mr2oc or alltrac.net.
with the 2bar map, use injectors that are around twice the size of your stockers.
IIRC the 7a injectors are around 200cc, so somthing around 360cc or so would give you enough fuel for just over 200whp, and would work in tandem with the 2bar map.

[urbandork]

i really would stay away from the check valves, and get a 2bar map from mr2oc or alltrac.net.
with the 2bar map, use injectors that are around twice the size of your stockers.
IIRC the 7a injectors are around 200cc, so somthing around 360cc or so would give you enough fuel for just over 200whp, and would work in tandem with the 2bar map.

manny link him to that site that explains why u need to get that size injectors with that thpe of bar sensor.

It helped me a lot

btw thanks again man ur one of the best on here

[southwest2118]

btw thanks again man ur one of the best on here

Hey dont mention it. I'm just doing my part in the world