![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 28, '04 From St.Louis Currently Offline Reputation: 15 (100%) ![]() |
All right, so here goes, this is my first topic post so go easy on me and please don't flame me too much. About 6 months ago i installed the suspension technique's sway bar kit on my 94 GT HB. I had done this previously on my 94 ST Coupe and no problems, so i finished the install on my Gt and went for a test drive around the block. Everything was fine, car drove increasingly better, but the only thing is that any time i go over a slight bump or hole in the road there is a loud knocking/clunking noise coming from the right rear. Now i know that its the sway bar cuse it never had the noise with the stock ones in. So my question is, has anyone ever had this prob, and if so..what do i do to get rid of it? I have tightened the sway bar tot he factory torque, and i have use plenty of lithium grease, so there are no probs, im lost and gettin really annoyed with this noise! PLEASE HELP!
![]() This post has been edited by 94celicadude: Mar 15, 2006 - 1:40 AM -------------------- ![]() 1994 GT Hatchback 1994 ST Coupe 1988 Corolla Wagon All-Trac 1999 Corvette 2008 Cobalt SS Turbo |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 28, '05 From Redondo Beach, CA Currently Offline Reputation: 86 (100%) ![]() |
make sure the end links are tight
-------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 28, '04 From St.Louis Currently Offline Reputation: 15 (100%) ![]() |
QUOTE(LewFX @ Mar 15, 2006 - 4:33 PM) [snapback]407936[/snapback] make sure the end links are tight They are, everything is torqued to the factory specs. -------------------- ![]() 1994 GT Hatchback 1994 ST Coupe 1988 Corolla Wagon All-Trac 1999 Corvette 2008 Cobalt SS Turbo |
![]() ![]() |
Lo-Fi Version | Time is now: February 24th, 2025 - 7:48 AM |