Wheels, Spacers, Adapters, Can it be done..... Options

[Fastbird]

Ok, I'm DYING for a specific set of wheels on our car. The HP Design Wheels HPR5 in black. But they don't come in a 5x100 bolt pattern.

I've seen spacers on eBay that convert a 5x100 pattern to a 5x114.3 pattern. These spacers are 30mm thick.

IF I was to run those with the 18x8 HPR5 with a +38mm offset, how would that look???? Someone, anyone???

[Nampetch]

Ok, I'm DYING for a specific set of wheels on our car. The HP Design Wheels HPR5 in black. But they don't come in a 5x100 bolt pattern.

I've seen spacers on eBay that convert a 5x100 pattern to a 5x114.3 pattern. These spacers are 30mm thick.

IF I was to run those with the 18x8 HPR5 with a +38mm offset, how would that look???? Someone, anyone???

Oh..that would be a problem I believed. Your wheel is +38 offset while spacer is 30 mm. Meaning if you push this spacer + your wheel then the offset will be as +8. It 's mean, your wheel will be overlap the overfender anyway.

The better idea is try to sale it and buy a new set if possible or use 10 mm spacer that made from high-strength alloy which could be a made-to-order..

goodluck..