Swap Guys, Track Times, Here We Go....lol Options

[Fastbird]

This interest is sparked by the fact that a good buddy of mine recently ran a 13.6@105 in his 05 GTO and is racing to get a set of headers and exhaust system for his car before our swap is complete because, in his words, "I will not have my car beat by that little Celica."

Which got me to thinking. Stock SRT-4 Neon's put out about 230 to the wheels. Turn (normally) mid 14's to upper mid 13's depending on the driver. From what Dr. Tweak is saying, our Celica should be in the 250-260 WHP range when we pick it up. I consider myself a good driver by any and all means, and given that the Celi only weighs about 2600-2700 lbs, should be able to turn a decent time.

What kind of times (if any) have you swap guys turned at the track??

Another thought I had is throwing some drag radials on the stock 15x7 wheels, but then it occured to me that it would probably be a littel better to plop a wider wheel (still a 15 or 16, just with an 8" width) on there for a better contact patch. Granted, I'm running a stock GT 5 speed and stock half-shafts up front, but what will they take in terms of abuse???

Just wondering. I know I said the car isn't going to see the track, but hey, I've got racing in my blood.

[bigal004321]

there is no way a stock celica st run a 16 flat...my GT cant even run that stock.

stock 1996 GT 16.4
1993 celica turbo 15.6

[Rjb23]

there is no way a stock celica st run a 16 flat...my GT cant even run that stock.

stock 1996 GT 16.4
1993 celica turbo 15.6

The USDM 93 alltrac has about 20 hp less then the 2nd gen JDM 3s, also it is about 300 to 500 lbs heavier than a swaped 6gen. A stock 2nd gen JDM 3s in a 6gen will run low 14's stock.

A stock st will not run 16's try 17 or 18's.