ST205 3SGTE with MR2T E153 tranny, some interrogations Options

[HaRv3sTeR]

Im planning to buy a ST205 front clip with a MR2T E153 tranny + LSD to do a swap. But i have some questions for those who use a E153 from the MR2T with their 3rd gen 3SGTE and I want 100% sure answers (ive ask those questions to Doc Tweek but he's not sure since he never used E153 with his swaps). So..

1. can you tell me if the MR2T (with LSD) tranny will work with all ST205 front axles?

2.if not, which one from the MR2T I need (please be specific, example: rear/front ,left/right, w/ABS or not,inner/outer)?
(im asking that since the engine from he MR2T is at the rear and celi is in front..so im not sure which is the one i need...also...on some sites..i see axles for ABS and some for non-ABS....my car has ABS so I choose with ABS right?)

3.do you see any more parts that ill need to buy to complete the swap (keep in mind that im auto and ill use all parts that the front clip will offer me)


TIA

[Kadett]

Is far is i know you need the MR2T Axles and ST205 axles wont fit.
I also read somewhere that when you use the MR2T trans you need to custom make an engine mount (rear one??)

Since you have an auto trans now you need (which wont be on the front cut):
Shifter assembley (directly go for the TRD shortshifter)
Shifter cables