ST205 3SGTE with MR2T E153 tranny, some interrogations Options

[HaRv3sTeR]

Im planning to buy a ST205 front clip with a MR2T E153 tranny + LSD to do a swap. But i have some questions for those who use a E153 from the MR2T with their 3rd gen 3SGTE and I want 100% sure answers (ive ask those questions to Doc Tweek but he's not sure since he never used E153 with his swaps). So..

1. can you tell me if the MR2T (with LSD) tranny will work with all ST205 front axles?

2.if not, which one from the MR2T I need (please be specific, example: rear/front ,left/right, w/ABS or not,inner/outer)?
(im asking that since the engine from he MR2T is at the rear and celi is in front..so im not sure which is the one i need...also...on some sites..i see axles for ABS and some for non-ABS....my car has ABS so I choose with ABS right?)

3.do you see any more parts that ill need to buy to complete the swap (keep in mind that im auto and ill use all parts that the front clip will offer me)


TIA

[burneeed]

this is debated so many times. This is why next week I should have pictures + an entire write up of a e153 swap. I had to get so many parts from an solara for my e153 like the shift actuator and all kinds of shifter cable parts. Ill post all the parts later. But here is what you will have to do. If you are using all st205 mounts your good on mounts. For the tranny you will need a shift actuator from a solara plus the whole shifter assembly. Now for the axles you will need mr2 lsd turbo axles (good luck expect to spend some good money on these) And alltrac outers and you should be good.