Completed Engine Swaps., who's got em. add your name and info. ;) Options

[Mynzeyes]

just like the topic says, i think this would be a very good little thread, just to give some insight for the newbs and dreamers as to what the swappers have done, what they went through, and how it's workin out to this day. feel free to add any info you wish, mainly the car type before, the new motor type, info about your personal swap (as all swaps are NOT created equal), a time frame, general cost, how is the performance, are you happy w/ it, etc... . let's see how big this list can get. .

-John-

edit: btw, only post if you are DONE and driving the car. that's what i'm lookin for.

[eggman40]

Just finished my swap a few weeks ago on my 94 St. its a 2nd Gen 3sgte with 92 mr2 e-153 tranny. I used mr2 innershafts and 94 V6 camry axels. used american gt pass. side mount, st185 driver's side mount/bracket, st204 front engine mount/bracket, st815 rear braket and jdm st205 rear mount. I used stock shift cables. Engine harness was done by DG Performance (highly recomended). Used st185 throtte cable (with minor modification to the firewall braket) Kept power steering using a power steering pressure hose from a 94 celica GT and about a foot of rubber return line. Changed the hose from hell/on earth while i had the motor out and while i took the stock downpipe off. (makes things easier). upgrades for now include a xspower 3in downpipe, 3in madrel bent custom exhaust with a gutted cat and Vibrant Flat Black Muffler, K&N FIPK air filter with adaptor bracket to the MAF, denso iridium spark pulgs, ngk wires. Using Greddy Block adaptor for oil temp guage. If you have any questions about the swap feel free to ask me. I did the swap myself with some help from friends. Good Luck to any future swappers!