running rich and idles very bad 7afte Options

[trd94]

ok i just intalled my new turbo kit and it seems to be running a little rich , my kit includes , t3 turbo in a 60 trim , wastegated at 7 psi , 89 ford probe injectors, 3 in intake pipe& down pipe back is also 3 in, 12:1 fmu , walbros 255 fuel pump, type rs bov,and a costome mount side intercooler, i have all the other little thing for the kit as well, i retarded my timming by 6 degrees and it just wont smooth out what would you guys think the problem is . i thank you for any help

This post has been edited by trd94: Apr 11, 2006 - 2:46 AM

[trd94]

ok guys i thank you for all your help. right now i went back to my old set up stock injectors ,12:1 fmu idle is back where it belongs i turned the boost down to around 4 psi ,i am just going to wait until i get my safcII and look in to this two bar map sensor, i plan on making good hp but in the same time i dont want to blow a piston out the side. thanks again for the help and please keep it coming

like nuke and cheesy said:

it runs like **** because you need to turn those injectors down at idle.

get a safc. i have the old school five knob kind and it works well. the new ones you can adjust for TP and that will be really helpful.

what 2bar would work for the 7afte?


also TRD94 posts some pics of your set up.

i do not know how to post pic but i do have a couple in my profile , if any one would like to post them for me go ahead by the way new paint job coming very soon!!

This post has been edited by trd94: Apr 12, 2006 - 2:36 AM