running rich and idles very bad 7afte Options

[trd94]

ok i just intalled my new turbo kit and it seems to be running a little rich , my kit includes , t3 turbo in a 60 trim , wastegated at 7 psi , 89 ford probe injectors, 3 in intake pipe& down pipe back is also 3 in, 12:1 fmu , walbros 255 fuel pump, type rs bov,and a costome mount side intercooler, i have all the other little thing for the kit as well, i retarded my timming by 6 degrees and it just wont smooth out what would you guys think the problem is . i thank you for any help

This post has been edited by trd94: Apr 11, 2006 - 2:46 AM

[presure2]

Also have check valve and stock preasure regulator, could that be the problem?

yes.

[CheesyLobster]

Also have check valve and stock preasure regulator, could that be the problem?

yes.

I have the same setup as there and i have NO problems (except i have stock fuelpump, works fine at 7psi), so i don't that thats the issue. make sure that you have your safcii set for "pressure." how are those probe injectors impedence? maybe thats the issue... i just know my fuel system works fine, i run perfect with 550cc injectors, fmu, checkvalves, safcii (-50 low tp, -25 high tp) and EVERYTHING else stock for fuel.