6G Celicas Forums

Welcome Guest ( Log In | Register )

> Overheating, + some issues, Need some help guys.
post Apr 18, 2006 - 12:13 AM
+Quote Post
creis



Enthusiast
*****
Joined Jan 10, '04
From Shoreline, WA
Currently Offline

Reputation: 4 (100%)




So I got my car back from the shop Sat woot.gif and it was all good, looked great. drove it to work today and all was good till on the way home, I stoped at a store to buy a battery for my door remote. and notived steam out the vent. popped the hood and the coolant was over flowing out the cap (not into the overflow take (well very little) started the car, and the temp shot up to 3/4 max but did not hold steady. drove it home gently, the temp guage went normal. got it home popped the hood and my radiator was cracked, figured that was the problem I lost a pretty good amount of coolant, so I let the crack dry out, and fiberglassed over the crack hopeing it would hold a little wile (ordered a new KOYO aluminum radiator should be here in a few days.)

any way let the fiberglass dry good and it did, started it up, everything seemed good, let it heat up filled the coolant everything looked good, fiberglass patch held good. drove it around for a wile, temp guage warmed up as normal and stayed normal.

got home and it was steaming again, fiberglass was holding but not 100% and was not (very little) overfloing into the side tank. and noticed the fans were not going on, tested it by letting the car idel for a wile then little reving, no fans at all, nothing. ( checked the relay and looks fine but I dont know much about telling a good one from a bad one)

what could be the cause of this, I did some searching and it could be the thumostat, but I dont undestand how my fans wont turn on.

any tips or knolage as to the cause, I'm gana try a few things tomarrow and hopefully you guys give me so good advise, but its probably gana go to the shop for a tune up and to see whats rong.

So I'm in the van again frown.gif

oh and now just today 3 tail light bulbs went out smile.gif

some pics I took SAT when i got it back:
IPB Image
IPB Image
IPB Image
Yeah my rear lisence place body peace is not clear coated, did not have it done since I'm making a new custom one.
IPB Image


--------------------
IPB Image
 
Start new topic
Replies
post Apr 18, 2006 - 1:29 AM
+Quote Post
creis



Enthusiast
*****
Joined Jan 10, '04
From Shoreline, WA
Currently Offline

Reputation: 4 (100%)




yeah my dad was saying its the readiator cap, but i dont really think that, its looks to me as though it is clearly overheating, would be cool if its something that simple (I'll get a new one) but I dont think the guage is right, I mean would there be much steam in the radiator at normal temp? I guess there could be but should not be that hot, water boils at 100 degrees C the temp or the coolat should be like 86 ish. and the fans are not turning on when its sits still ideling or reving at all, there clearly not working. (will test them separately tomarrow)

my tires 215x17x45

edit: how much pressure is in the radiator when at normal temp, like PSI?

This post has been edited by creis: Apr 18, 2006 - 1:33 AM


--------------------
IPB Image

Posts in this topic


Reply to this topicStart new topic
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 20th, 2025 - 3:41 AM