 The MR2T tranny "short axel" solution, For those that want to know... |
 Jan 12, 2006 - 11:33 PM
|
 
|
|
Enthusiast  Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%)  |
For people that are interested in running the MR2T tranny in their swap, you may have noticed many people claiming that their axel pops out because it is too short. Different combinations of inners and outters have been tried with sporatic results. So, for kicks, I took a look at mine to see what was done on the passenger side. Guess, what? When Jamasco did mine, they added a second "thicker section" (sorry I don't know the name of this piece). And then used longer studs to connect the two sections together. Looks OEM and I have had no problems. I will take some pics if anyone is interested.
-------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
 |
Replies
|
May 7, 2006 - 12:51 PM
|
|
 Enthusiast Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
Well heres the situation. The axle is the perfect length with a full "extra" spacer if I put the axle all the way into the transmission. However, if I do that my carrier bearing is almost 1/2'' to far inwards to bolt up. As far as I know, axles are supposed to go in as far as they can, but the bearing wont bolt up to the block if I do that. Also, if I bolt up the bearing, the axle is too long to bolt the hub back up.
So I have a request. Can someone take a picture of their inner axle to see how much of the inner comes out of the transmission? If the bearing decides how far the axle goes in, then the spacer needs to be cut about 1/2'' so that the hub can bolt in. Burneed did you saw off 1/4'' or did you saw off everything but a 1/4'' and what did you use? I dont think a hack saw will work with this piece. Edit: Also what Im reading on MR2 board is that some axles wont bolt up if they are the wrong axles. So now Im doubting everything I have, which is even more frustrating. Can someone with the MR2 tranny take a pic of the transmission where the axle enters so I can get an idea? This post has been edited by Supersprynt: May 7, 2006 - 5:54 PM -------------------- |
Posts in this topic
jgreening The MR2T tranny "short axel" solution Jan 12, 2006 - 11:33 PM
lagos pics please! Jan 13, 2006 - 12:35 AM Supersprynt What combination of axles are you using?
I second... Jan 13, 2006 - 1:06 AM
jgreening QUOTE(Supersprynt @ Jan 13, 2006 - 12... Jan 13, 2006 - 10:18 AM BBoYRuGGeD third the request...this should be very good info
... Jan 13, 2006 - 1:33 AM Supersprynt So basically what your saying is that between the ... Jan 13, 2006 - 11:16 AM jgreening QUOTE(Supersprynt @ Jan 13, 2006 - 10... Jan 13, 2006 - 12:11 PM Rjb23 Pics, I haven't had trouble from mine yet(knoc... Jan 13, 2006 - 1:43 PM Supersprynt Yeah your right I can do it myself but keep it civ... Jan 13, 2006 - 2:33 PM jgreening It was a joke (hence the smily face). I apologize... Jan 13, 2006 - 2:49 PM OOBE Damn, some people get butt-hurt so easy on the Int... Jan 13, 2006 - 3:08 PM Supersprynt QUOTE(jgreening @ Jan 13, 2006 - 2:4... Jan 13, 2006 - 3:39 PM JoKeRkId613 QUOTE(Supersprynt @ Jan 13, 2006 - 1... Jan 13, 2006 - 3:51 PM OOBE LOL@ Jan 13, 2006 - 7:25 PM Rjb23 Pics? Jan 14, 2006 - 4:17 PM lagos jack up the car and take lots of pics!!... Jan 14, 2006 - 4:35 PM SilverCell94 great update,
i been trying to figure this out my... Jan 14, 2006 - 6:14 PM jgreening I just took a couple pics. You can see the pieces... Jan 15, 2006 - 11:15 PM jgreening bump for pics Jan 15, 2006 - 11:47 PM jgreening suprised noone has weighed in here after posting p... Jan 16, 2006 - 2:32 AM lagos now, where the hell did that come from! it do... Jan 16, 2006 - 2:36 AM scothaniel Looks like they removed the CV housing from anothe... Jan 16, 2006 - 12:08 PM jgreening QUOTE(scothaniel @ Jan 16, 2006 - 11... Jan 17, 2006 - 9:18 PM defgeph Please figure this out guys, excellent information... Jan 17, 2006 - 9:23 PM defgeph have you tired posting this on mr2oc ? Jan 17, 2006 - 9:30 PM jgreening QUOTE(defgeph @ Jan 17, 2006 - 8:30 ... Jan 17, 2006 - 9:56 PM lagos anyone got a pic of a normal mr2 axel to compare t... Jan 17, 2006 - 10:01 PM scothaniel I have a spare set I can take some pics of.
There... Jan 18, 2006 - 12:53 AM ZoomZoom can you please find out from what car did they get... Jan 20, 2006 - 9:10 AM playr158 i would assume it would come from another MR2 axel... Jan 20, 2006 - 9:22 AM speedy Are there any updates for this thread? Feb 13, 2006 - 5:58 AM Supersprynt I didnt see that pic. I am going to get under my c... Feb 13, 2006 - 9:00 AM sugarfree Yea, i would like to know this also, because im pl... Feb 14, 2006 - 10:58 AM Supersprynt NO the S54 transmission is the GT tranny and all y... Feb 14, 2006 - 12:02 PM sugarfree Awsome, i just did a search right before you answe... Feb 14, 2006 - 12:22 PM Supersprynt ST185 outters/E153 OEM LSD inners. Feb 14, 2006 - 8:48 PM jgreening RE: The MR2T tranny "short axel" solution Feb 14, 2006 - 9:03 PM Supersprynt Yours looks bigger, but idk if its just an angle p... Feb 14, 2006 - 9:06 PM lagos umm that looks like the same sh1t. maybe all mr2 ... Feb 14, 2006 - 9:55 PM jgreening QUOTE(lagos @ Feb 14, 2006 - 8:55 PM... Feb 15, 2006 - 6:29 AM SeanGTS My Mr2 inners look indentical to supersprynts firs... Feb 14, 2006 - 10:55 PM Supersprynt I contaced them, never got a response. Feb 14, 2006 - 11:40 PM presure2 ouch, erik that looks stretched!
now i see wha... Feb 15, 2006 - 6:36 AM Supersprynt Jay is your car jacked up in that pic? Feb 15, 2006 - 8:02 AM jgreening QUOTE(Supersprynt @ Feb 15, 2006 - 7... Feb 16, 2006 - 7:00 AM scothaniel Its 2 All-Trac CV housings for sure (outer-race fo... Feb 26, 2006 - 7:50 PM Supersprynt Nice, I should have my outer's lying around so... Feb 26, 2006 - 8:11 PM Green_MachToy Yeah - this works great! I took the outer por... Mar 2, 2006 - 12:42 AM celica3sgte Just for reference, the difference between the cam... Mar 25, 2006 - 11:30 PM jgreening QUOTE(celica3sgte @ Mar 25, 2006 - 10... Mar 26, 2006 - 7:05 AM ems3s QUOTE(jgreening @ Mar 26, 2006 - 10... Mar 26, 2006 - 7:33 AM madmods Man I learn alot from you guys Mar 26, 2006 - 7:39 PM scothaniel QUOTEI have spoken to several wreckers in my area ... Mar 26, 2006 - 11:10 PM Supersprynt Jay can you take a pic of your drivers side also?
... Apr 1, 2006 - 3:54 PM Green_MachToy I have a few extra bolts if you need them. They a... Apr 3, 2006 - 8:11 PM Supersprynt Here is the piece that seperates from the axle tha... Apr 1, 2006 - 7:02 PM ILuvMyCelica95 ^ yeah i take good pics. Apr 1, 2006 - 7:05 PM Supersprynt Your pics arent really working in the forum but do... Apr 3, 2006 - 8:18 PM playr158 erik go to www.mcmaster.com you'll probably be... Apr 3, 2006 - 10:47 PM Supersprynt thats what u think. Apr 3, 2006 - 11:29 PM scothaniel For fasteners:
http://www.fastenal.com/ Apr 4, 2006 - 12:03 AM scothaniel Just bought a few of these 10mm x 1.5 x 90mm CL 12... Apr 5, 2006 - 4:50 PM Supersprynt Update: Made my axle, heres a pic:
Old one: Apr 19, 2006 - 9:34 PM presure2 congrats erik! Apr 20, 2006 - 4:48 AM jgreening Why is there the big gap with the gasket sealer? ... Apr 20, 2006 - 7:55 AM Supersprynt Its not a gap its bearing grease oozing out when I... Apr 20, 2006 - 8:21 AM devilsden97 3 letters
L. S. P. Apr 20, 2006 - 8:56 AM scothaniel QUOTE3 letters
L. S. P
Got any more letters - ca... Apr 20, 2006 - 9:38 AM Supersprynt He's referring to my possible debuting of the ... Apr 20, 2006 - 9:40 AM devilsden97 QUOTE(scothaniel @ Apr 20, 2006 - 10... Apr 20, 2006 - 10:24 AM Rjb23 Have you tried putting the axle in yet? I did the ... Apr 20, 2006 - 10:27 AM scothaniel I also checked the urbandictionary - but I didnt t... Apr 20, 2006 - 10:27 AM Supersprynt QUOTE(Rjb23 @ Apr 20, 2006 - 11:27 A... Apr 20, 2006 - 1:39 PM Rjb23 I have a 91 e153 non lsd with 91 alltrac axles and... Apr 20, 2006 - 2:47 PM Supersprynt I have 93+ tranny and 93 axles, obviously. I have ... Apr 20, 2006 - 2:50 PM jgreening QUOTE(Supersprynt @ Apr 20, 2006 - 2... Apr 21, 2006 - 11:13 PM yungazzdriver i got a new short axle solution guys so pay attent... Apr 22, 2006 - 11:58 AM scothaniel I'm confused - can you run through that again?... Apr 23, 2006 - 11:36 PM yungazzdriver so what your telling me is that a st185 tranny wil... Apr 24, 2006 - 7:48 AM phattyduck QUOTE(yungazzdriver @ Apr 24, 2006 - 5... Apr 24, 2006 - 7:16 PM yungazzdriver QUOTE(phattyduck @ Apr 24, 2006 - 7... Apr 25, 2006 - 12:14 PM phattyduck QUOTE(yungazzdriver @ Apr 25, 2006 - 10... Apr 25, 2006 - 4:01 PM afroman I think the big thing is your lack of periods or s... Apr 25, 2006 - 1:19 PM jgreening Hey guys please stop cluttering up my thread with ... Apr 25, 2006 - 4:17 PM K-ESD now i'm more confused than ever about the camr... Apr 25, 2006 - 5:25 PM Supersprynt 90 Camry w/ST205 motor, wow sleeper. Apr 25, 2006 - 9:14 PM HaRv3sTeR QUOTE(Supersprynt @ Apr 26, 2006 - 2... Apr 26, 2006 - 11:07 AM phattyduck QUOTE(HaRv3sTeR @ Apr 26, 2006 - 9:0... Apr 26, 2006 - 4:07 PM BBoYRuGGeD QUOTE(phattyduck @ Apr 26, 2006 - 9... Apr 26, 2006 - 6:15 PM Supersprynt QUOTEPS. I'm using all '90 V6 Camry stuff ... Apr 26, 2006 - 11:11 AM ZoomZoom I was wondering if anybody have figure it out if t... May 5, 2006 - 6:39 AM Rjb23 It was to long for me but it may not be for others... May 5, 2006 - 8:14 AM Supersprynt I turned the spacer so that the bearings would not... May 5, 2006 - 8:16 AM ZoomZoom supersprynt,
was your axle too long as well like r... May 5, 2006 - 11:42 AM Supersprynt I havent put it in yet I'll tell you tomorrow. May 5, 2006 - 11:43 AM burneeed Ok I finished mine last night... Mr2 inners and al... May 5, 2006 - 1:55 PM BBoYRuGGeD holy damn that sucks supersprynt...hopefully u fig... May 7, 2006 - 3:08 PM Supersprynt Honestly, I totally regret putting in the E153. Bu... May 7, 2006 - 3:18 PM WannabeGT4 I don't see this section in Jay's axle set... May 7, 2006 - 7:18 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 17th, 2025 - 8:00 AM |