3SGTE!? A test of knowledge Options

[5sfeTurbo]

As of now I am gathering up all the info needed to swap a ST185 225hp in the ol' GT. Some problems, lets see how good you guys are. When buying the JDM spec engine how the hell would I pass emissions? But more importantly how easy is it to do auto to manny swap, or would it be easier to rebuild the auto tranny to take the power. Lastly I dont care what state who would have the credentials and know how to do this this swap down to the electrical schematics. What site can I find for aftermarket parts for it. If you have this engine what was your tune to the wheels.

[Charlie97L]

QUOTE (5sfeTurbo @ Jul 1, 2003 - 10:35 AM)

As of now I am gathering up all the info needed to swap a ST185 225hp in the ol' GT. Some problems, lets see how good you guys are. When buying the JDM spec engine how the hell would I pass emissions? But more importantly how easy is it to do auto to manny swap, or would it be easier to rebuild the auto tranny to take the power. Lastly I dont care what state who would have the credentials and know how to do this this swap down to the electrical schematics. What site can I find for aftermarket parts for it. If you have this engine what was your tune to the wheels.

aftermarket parst abound for this engine.

emissions will depend on where you live. if you want to pass legally, you'll have to get the intake mani off of a US alltrac or mr2, the 2nd catalytic converter, and all the EGR equipment. IMO, better to just find a place that will pass you.

mike (qatar11) is your man for the wiring.

you can rebuild the auto, but that will cost more than a manual swap, probably.

what you get to the wheels will depend on what extras you add to the engine.

good luck! if you have any more ?s just post.