Rear spoiler raising blocks Options

[cfcdoc]

Hi all, new owner of GT4 ST205. Just taken off a bonded spoiler and i`m trying to put raising blocks on with the original spoiler. The holes in the bootlid match up with the raising blocks but the holes on the top of the raising blocks do not match up with the holes on the bottom of the original spoiler. Can it be this hard. The original spoiler fits onto the boot lid but not onto the raising blocks. What is going on

[celiracer]

U drill the holes and then you get self tapping screws and some double sided sticky stuff. Then you put the tape on the wing and put it on the blocks. Then you screw in the self tapping screws. It should be secure enough. I think thats how most people do it?

[cfcdoc]

U drill the holes and then you get self tapping screws and some double sided sticky stuff. Then you put the tape on the wing and put it on the blocks. Then you screw in the self tapping screws. It should be secure enough. I think thats how most people do it?

The raising blocks come with a fitting kit. I just cannot see how the screws will purchase but will give it a try.