Raising Boost Checklist, what percautions should i take Options

[eggman40]

Hello everyone, I am getting ready to get a boost controller and put my 3sgte at 13psi and wanted to make sure i dont miss anything and hutrt the motor.
I will install a FMIC and a turbo xs boost controller. i have the stock ct26 turbo on the 2nd gen 3s. Aside from a better fuel pump what else will i need to do? Thanks for the help ahead of time

This post has been edited by eggman40: May 18, 2006 - 3:44 PM

[WannabeGT4]

You can disable fuel cut by disconnecting the vacuum line to the Turbo Pressure Sensor and plugging it.

If you want to retain fuel cut you can just wire in a zener diode to the PIM input of your ECU or build this simple circuit to make it adjustable:

http://toymr2.tripod.com/fcd.html

EDIT: WHOA! just clicked the ebay link... DO NOT PAY $89 FOR THAT!

This post has been edited by WannabeGT4: May 18, 2006 - 4:14 PM