Pics of Teins SS out of the car +GT4 bumper Options

[celicarus]

-- I received the GT4 bumper a few days ago - and tried it on the 96 - i'm gonna have to get the lower C-One lip pretty soon - to make it look nicer --

while I had the Teins out of the 96 to put on the 98 i took some snap shots for those who wants an image of what it looks like with cusco's -

Odd thing is that when driving the 98 on stock suspension going into turns/corners the tires would screech as if i was drifting - now that the teins are on it screech's even more (cause i'm cornering faster) i don't remember having that problem on the 96 ever (unless i was going really fast)-- i forget what tires are on the 98 (continental something i think - all seasons) , but i had kumho's on the 96 - could it be the tires? I still need an alignment, but figured i'd wait until my steering wheel arrives in the mail to install that before going in for an alignment -- a full 2inch drop all around on the 98 -- handling is alot better than stock -

My2Celi - his brother and friends dropped over yesterday helping me install the short shifter i bought off of ebay - it's about 1 inch shorter - had some hard time removing one of the clips after the assembly was out of the car - but his brother managed to remove it --

another problem i was hoping to resolve with the short shifter was the stiffness of the shifting -- (which it didn't) i havn't driven a stick in so many years - i'm getting use to it again - test drove My2Celi's car and it was alot smoother at shifting -- he suggested some sort of adjustment with the clutch - i'm gonna have to research this - any suggestions guys --

[Supersprynt]

No i mean the damper, isnt there a clicker on the top?

[celicarus]

No i mean the damper, isnt there a clicker on the top?

yeah there is - you won't be able to use the hex tool that was including - you have to use ur fingers to adjust it - unless you want to remove the rear interiror pieces to use the tool --- you can turn it using ur fingers pretty easily -- i havn't had a problem doin so

This post has been edited by celicarus: May 21, 2006 - 9:42 PM

[anubis0108]

No i mean the damper, isnt there a clicker on the top?

yeah there is - you won't be able to use the hex tool that was including - you have to use ur fingers to adjust it - unless you want to remove the truck interiror pieces to use the tool --- you can turn it using ur fingers pretty easily -- i havn't had a problem doin so

or you could always get teins edfc that would be real hot