Are 94 blinkers interchangeable with 96 and above?, Exterior Lighting/Fixture Inquiry |
Are 94 blinkers interchangeable with 96 and above?, Exterior Lighting/Fixture Inquiry |
Jun 1, 2006 - 2:47 AM |
|
Enthusiast Joined Jun 1, '06 From Seattle, WA USA Currently Offline Reputation: 0 (0%) |
I've been looking at getting the euro-style clear front blinkers for my '94 GT on ebay but they are specified for years 96 and above. I've tried comparing pictures of 94 blinker fixtures to the newer years but it's hard to distinguish. It almost looks as if the 96 and aboves are slightly more angular. Does anyone know if they are the same size? Or do the 96 and above differ from the 94's? Any insight would be much appreciated, Thx. -6GC_Menace |
Jun 1, 2006 - 6:06 AM |
|
Enthusiast Joined Mar 29, '06 From Hull, UK Currently Offline Reputation: 0 (0%) |
I dont think gen5 ones fit either to be honest. I think they are a similar shape, but alot smaller in length.
best bet is to get some clear perspex and modify your current ones. if you put a bit in the oven at 140deg C for about 15-20 minutes it should be soft enough to bend easily. then just dremmel it out and I think if you put the original housing in at about the same temp but remove any rubber and keep checking it then the glue holding the yellow lens will be soft enough to prise it off. Then either hot glue or silicone the clear one on and get a replacement silvertech or yellow led bulb. (I'd go for led, cos I the silvertech bulbs aren't very bright. This post has been edited by vsideboy: Jun 1, 2006 - 6:06 AM |
Lo-Fi Version | Time is now: November 28th, 2024 - 6:04 PM |