3rd ECU plug for 3sgte wiring, any ideas? Options

[CelicaSTX02]

Hey guys,
So yeah....I am having trouble finding the 3rd ECU plug for the wiring of my 3sgte swap. I can find plugs that matches, but I need to find a plug with all the pinouts full. The plugs are really hard to open without damaging them, so its complicated to just open them up and put wires in them. Dave (aka DG Performance) is doing the wiring for me and if you guys can help me figure out how I can get that 3rd ECU plug, that would be awesome for me and him. Thanx in advance.

OH yeah, the plug has 11 pin slots on top and 11 on the bottom row. 22 pin slots in total.

[toyotacrazy]

What is the name of the 22 pin connector? Im doing my swap and I think I got the 3rd plug. All ecm plugs are full of connectors plus got two more connectors 4 inches off ecm. One grey and one white. Also I have the C.O. relay plug. Then I have wires hanging off those connectors with no other plugs. On my gt I dont want to cut any of the wires that are staying on the car. So I found a connector (13 pin) and repinned it. So hopefully it will be plug and play with most of the combination meter wires. On the rest that I couldnt come up with a matching connector, I sheered the insulation off the wires, behind the connector and soldered then wraped with electrical tape. I'm trying to make the wiring as plug and play as possible. I hope this helps someone in their swap. Also if anyone needs an extra 13 pin connector II2 let me know. I got an extra. Thanks guys!

[CelicaSTX02]

What is the name of the 22 pin connector? Im doing my swap and I think I got the 3rd plug. All ecm plugs are full of connectors plus got two more connectors 4 inches off ecm. One grey and one white. Also I have the C.O. relay plug. Then I have wires hanging off those connectors with no other plugs. On my gt I dont want to cut any of the wires that are staying on the car. So I found a connector (13 pin) and repinned it. So hopefully it will be plug and play with most of the combination meter wires. On the rest that I couldnt come up with a matching connector, I sheered the insulation off the wires, behind the connector and soldered then wraped with electrical tape. I'm trying to make the wiring as plug and play as possible. I hope this helps someone in their swap. Also if anyone needs an extra 13 pin connector II2 let me know. I got an extra. Thanks guys!

oh dude, I only needed that 3rd ecu plug, but I found 3 of them at the junkyard.......two came from Camry's and one came from a paseo. Justin (wannabegt4) hooked me up with the schematics for reppining it. It looks like you don't have to actually have to fill in all the pins, you just gotta put it in the correct place.....here's the pic he gave me:



hey Justin, thanx again for hooking us up with the diagram!